Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Assembling your Micropool
Single decker station
In the box:
1 x Top panel
2 x Feet
1 x backing card (optional)
1 x Top panel
2 x Feet
1 x Backing card (optional)
Step by step
Step 1
Flip top panel over. Line up studs on the feet with holes on the panel. Firmly secure feet onto panel.
Step 2
Flip base over. If you have a backing card, slide it into the slots at the back.
Step 3
Load base with products. Assembly is complete.
Step 1
Flip top panel over.
Line up studs on the feet with holes on the panel. Firmly secure feet onto panel.
Step 2
Flip base over. If you have a backing card, slide it into the slots at the back.
Step 3
Load base with products. Assembly is complete.
Double decker station
In the box:
1 x Top (container) panel
1 x Bottom (lid) panel
2 x Side panel
1 x Rear panel
1 x Backing card (optional)
1 x Top (container) panel
1 x Bottom (lid) panel
2 x Side panel
1 x Rear panel
1 x Backing card (optional)
Step by step
Step 1
Line up slots on lid panel with slots on side panels. Tap panel with a mallet until it’s all the way in.
Step 2
Line up slots on rear panel with slots on side panels. Tap panel with a mallet until it’s all the way in.
Step 3
Line up slots on container panel with slots on side panels. Tap panel with a mallet until it’s all the way in.
Step 4
If you have a backing card, slide it into the slots at the back.
Step 5
Load base with products. Assembly is complete.
Step 1
Line up slots on lid panel with slots on side panels.
Tap panel with a mallet until it’s all the way in.
Step 2
Line up slots on rear panel with slots on side panels.
Tap panel with a mallet until it’s all the way in
.
Step 3
Line up slots on container panel with slots on side panels.
Tap panel with a mallet until it’s all the way in.
Assembly is complete.
Invalid password
Enter